For this project you will need the following:Silicon Moulding Compound
Stainless Steel Burnisher
Stainless Steel Brush
Art Clay 650 Silver 7 or 10g – depending on the size of the print to be taken Sanding Pads
Jump Ring & Necklace or Earring fittings
Liver of Sulphur
This is a wonderful project to make as a present for parents, grandparents aunts, etc. Or for a new parent to make as a keepsake.
1. Mix together equal quantities of the blue and white Silicon Moulding Compound until well blended, about 5mls of each for a small child’s print. You have to ensure that there are no streaks or light and dark patches. Roll this mixture into a ball and flatten slightly.
2. Press a clean and dry finger or thumb into this ball and hold for about 1 minute. You will need to allow this mould to rest for about five to eight minutes. It is ready when a fingernail pressed into the silicon no longer leaves an impression.
3. When the mould is ready press the Art Clay into the mould and smooth out the back.
4. At this stage a Bail Back or Eyelet can be pressed into the wet clay or they can be attached later using a bit of Art Clay Paste.
5. Allow the Art Clay to dry either in the mould for a few hours or overnight or after about 1 hour carefully remove the Art Clay shape and dry using a hairdryer or in a moderate oven.
6. When completely dry you can sand out any rough edges and carve out the person’s name or date of birth, etc.
7. You can now fire the shape on a Gas Hob, with a Gas torch or in a Kiln. Firing instructions for the different methods are included with the Art Clay.
8. Once fired the fingerprint can then be brushed with a Stainless Steel Brush and burnished. Burnishing helps strengthens the finished item as well as giving it a lovely shine.
9. You can also finish the piece by dipping it into a solution of Liver of Sulphur. This does highlight the finger print rather well. You can achieve all sorts of colours using this method and it may be worth experimenting.
10. If you do not like the finished effect with the Liver of Sulphur then just refire the piece, brush and burnish.
You know have a wonderful keepsake of someone special to wear as a Pendant, Brooch, Charm, Tie Pin, etc. Enjoy!!!
A kit is available with everything you need to make your own Fingerprint for only £32.95 which is a 16% saving on the normal Retail Price!! The kit contains enough to be able to make 2 fingerprints of children.
The kit includes: Stainless Steel MeshStainless Steel Brush
Burnisher
Art Clay 650 10g
Sanding Pads – 3 grits
A Bail Back
Sterling Silver 18" or 16" Necklace
Liver of Sulphur
Blue & White Moulding Compound
Buy the kit here...
