Crazy Daisy Jeans

Funk up a dull drab pair of jeans with a little bit of flower power. Great for kids jeans or hippie ladies jeans or a project for a teenager, you’re bound to be a trend-setter in funky daisy jeans. Quick and easy to do and not a great deal of artistic flare is needed.

To make daisy jeans you will need…
A pair of jeans (cheap jeans are ideal), thick bleach, artists paintbrushes, thick card, scraps of bright fabric (look in the patchwork box in your local haberdashery) and a needle and thread.

Lay the jeans out flat on a table. Move anything from the area that would be spoilt should it come into contact with the bleach.

Push some thick card up the inside of the right leg of the jeans. This creates a firm base and prevents bleach from seeping through to the fabric below.

Along the bottom hem and up the side seem of the leg to the knee draw 4 to 8 daisies with a biro. The flowers can be assorted sizes. Start off with an “O” shape at the centre and draw six petals or so coming off from the daisy middle. Just draw the flower heads – no stalks or leaves.

Once you are happy with the design go over the daisies with bleach. Pour some bleach onto a plate (thick bleach is best) and using a paint brush, brush the bleach over the biro lines.

You need to work quickly because not only will some brush bristles melt, but the bleach will also be bleaching and attacking the fabric of the jeans. Really you want all the daisies bleached to a similar colour.

Reapply bleach to areas you feel needs it.

When all the daisies have turned white, immerse the jeans into a bowl of water and rinse three or four times to get all of the bleach out. Do not put them into the washing machine because the bleach will perish the rubber seal of the washing machine. Leave the jeans to dry.

You can leave the jeans like this, or you can give each daisy a coloured centre.

Here’s how to colour centres…
Draw around a mug or something onto the back of some brightly coloured fabric. Cut out and with a needle and threads sew a row of running stitches around the outside of the fabric circle. Draw the running stitches up so that the raw edges are drawn in. Flatten the circle out, this is your daisy centre. Adjust the tightness of the “Drawing up” to make the centre bigger or smaller to fit each particular daisy. Sew or Wonderwed the daisy centre into place on the jeans. Use invisible stitching, hemming stitch would be good.

Feeling adventurous?

Try covering the jeans in daisies, the front and back. Or just across the seat of the jeans. The funky design possibilities are endless.

More of S. Roberts craft ideas can be found at http://busy-crafting.blogspot.com/. For Christmas crafts visit http://www.santaspostbag.co.uk/ where you can also send a free letter to your child from Santa Claus. For Jewellery crafting, visit http://www.artclaysupplies.co.uk/ for beautiful home-made jewellery making projects.

Home-made Safety Pin Jewellery

By S. Roberts

Make a beautiful bracelet from safety pins and beads. No one will know what it's made of until they look really closely.

To make the bracelet you will need...
Roughly 85 silver safety pins of the same size, an assortment of small beads and some sheering elastic.

Decorate each safety pin by opening each pin and slipping on some beads. Make sure there are enough beads to fill that side of the safety pin once the pin is closed again. Close the pin and use a pair of plies to squeeze the head of the safety pin to hold the pin firmly closed.

Decorate each pin in this way, adding beads to pins in a random way.

The pins are now threaded together. You will notice that there is a hole in the pinhead and another hole at the other end of the safety pin where the metal is turned, creating a circle. These are the holes used when threading up the pins.

Two lines of elastic are used one at the top and one below with the pins threaded onto them like the rungs of a ladder. To begin, thread the top line through the head of the first pin and the bottom line and through the circle hole. With the second pin, thread the top line through the circle hole and the bottom line and through the head of the pin.

Continue adding pins to the lines in this way alternating which way you add each pin. Make sure when you add the safety pins that all the beads are visible on the same side.

When the last safety pin has been added tie the two ends of the top line together so that all the pins sit closely together. Then tie off the bottom line in a similar way.

S. Roberts is one of Santa’s Helpers and writes for www.santaspostbag.co.uk a Christmas educational & activity website. For more festive ideas & gifts to make visit www.santaspostbag.co.uk/homemade-christmas-gift-ideas.html SantasPostbag is in association with www.bigboystoyz.com Together keeping Christmas Magical

LED Light up Bottle

By S. Roberts

You can find lots of unusual things in bottles, ships and messages, so why not fill a bottle with LED lights? What a bright idea! This attractive bottle is a great talking point; it makes a nice table decoration or a festive night-light, everyone will want one of these.

To make the LED light up bottle you will need... A clear glass bottle, a meter or so of tinsel, a loo roll or kitchen towel tube, glitter, PVA glue, and a set of 20 LED lights. You can get these ready made from with a battery compartment from the '99p Store' on your local high street. Tech confident people could make their own from individual components. DO NOT use mains fairy lights, this is a fire hazard!

First wash out the bottle and remove all the labels. Use a nice smelling detergent to rid the bottle of any lingering odours from its previous contents. Leave the bottle to drain and dry out completely.

Take the LED lights and the Tinsel, use a small amount of selotape and stick the wire directly behind the last LED bulb (the bulb furthest away from the battery compartment) to the end of the strip of tinsel.

Twist the string of lights and the tinsel loosely together and carefully push the lights and tinsel into the bottle until the battery compartment rests on the neck of the bottle.

The loo roll or kitchen towel tube will become a fancy bottle stopper that covers the battery compartment. Draw around the end of the tube onto a piece of card. A grocery box is great. Cut the disc out and push it into the end of the tube. Use a bit of selotape to hold it in place.

Cover the tube and end piece in PVA glue and sprinkle with glitter. Cover the cardboard completely so that it is no longer visible. Leave to dry.

Perch the battery compartment on top of the bottle and place the glitter bottle stopper over the top of it, so that it hides the batteries and part of the neck of the bottle.


S. Roberts write for www.santaspostbag.co.uk a free educational resource packed with creative things to do and make including traditional, religious & 21-century activities. Visit http://www.santaspostbag.co.uk/christmas-fun-stuff.html for more fun stuff. SantasPostbag is in association with www.bigboystoyz.com Together keeping Christmas magical.