If you are having a medieval theme wedding, it’s nice if you can keep the medieval theme going through most of the day. Medieval gifts for the important guests who played an active role in the wedding can be tricky, if you want it to have a medieval association. It’s traditional to give the best man a sentimental gift and watches are popular. With this in mind, I made our best man a medieval Rolex watch, which we introduced as a Rolex prototype that was being developed during medieval times. We advised the best man as he unwrapped his gift, that it worked on solar power so would only worked if the sun was shining. This sundial got great laughs during the Grooms speech, and was really good fun. To make a medieval sundial wrist watch you will need...
6mm thick scrap of MDF,Strong clear drying glue,
Brass paper clip – the type with opening out wings at the back,
Gold ink gel pen,
Wood stain,
Varnish,
Rock leather wrist strap,
And a drill bit attachment that cuts out circles this is to create the sundial face, so select an appropriate sizes drill bit.
Start buy cutting a circle from the MDF close to a corner. You need to cut it close to the corner because not only do you need a circle, but you also need a small triangle, and cutting the circle close to a corner means that you will cut out the two shapes in one go.
Give the circle and triangle a light sanding to make the edges neat and smooth.
Give the MDF a coat of dark wood stain. MDF is essentially wood dust glued together, so it doesn’t have a grain to it, but if you pain the wood stain on with a brush and paint in the same direction, you can give the wood an appearance of grain. Leave to dry and them apply wood stain in the same way to the other side and edges.
Next with the gold ink gel pen you need to draw on roman numerals in the correct places on the face of the sundial. You could search Google images for a sundial faces for an example to copy.You could also add a logo to the bottom part of the face. I chose to add the Rolex logo, which is a simple crown shape. Again you can search Google images for watch logos to copy.
The medieval way was to embellish everything. So I drew gold borders on both sides and edges of the sundials triangle.
When the ink has properly dried, apply a coat of clear varnish to the wood to protect the ink.
When the varnish has dried, take the brass coloured paper fastener and open up the flaps at the back and fold them out flat. Put the fastener down on the table vertically, with the head facing upwards. Then with the wrong side of sundial, add a blob of clear drying glue to the drill hole that the circle left in the face of the sundial. Turn the face over and hold it the right way up, (on a modern watch this would be with 12 at the top or furthest away from you). Then stick the face onto the paper fastening head.
If you imaging there’s a line coming down from 12 to 6, this is the line that the paper fastener need to follow at the back of the face.
With paper fastener in place, apply some glue to one edge of the triangle, and stick it to the top half on the sundial along the 12 to 6 line. The curve of the triangle should curve from the ‘12’ position and there should be a tall point in the centre of the sundial face. Clean off surplus glue and leave to dry.
Put the leather wrist strap on, and do it up. If the recipient is bigger or smaller than you need to guesstimate the size that it would be done up at. With the buckle at the back of the wrist, make a mark with a pen on the strap on the top middle of the wrist. This is where the sundial face will attach to the strap.
If your leather rock wrist strap has studs, simply remove the stud where you marked the centre. If it’s just a leather strap, you will need to make a hole at this point.
Close the paper fastener wings together and push them through the strap and open them out again on the other side of the strap. Add a bit of glue to stick them to the strap. You could also stick some ribbon over the wings to conceal them and to make the sundial watch more wearable.
And there you have it, a medieval Rolex watch – solar powered because obviously you do need the sun for it to work – the perfect gift for any medieval lord.
